Pride Go Go Elite Traveller Gen 3 Platinum

The Pride Go Go Elite Traveller® Gen 3 Platinum 4-Wheel Mobility Scooter takes Pride’s compact travel-scooter platform and adds premium convenience features designed to make everyday operation, charging, transportation, and positioning easier. The SC443EMS combines a 300-lb. weight capacity, Pride’s EZ Turn technology, feather-touch disassembly, an improved deck design, and exclusive Charge360 magnetic charging in a compact four-wheel configuration.

A redesigned sloped deck provides additional legroom and pass-through space compared with more traditional compact scooter layouts. Its textured, easy-to-clean surface gives the rider flexibility to position their feet on the center deck or along the sloped areas near the front wheels, helping create a more comfortable seating position during everyday use.

Pride’s patented EZ Turn technology gives the four-wheel Elite Traveller Gen 3 Platinum a tight 39.2-inch turning radius. This allows the scooter to maneuver more easily through homes, stores, shopping areas, and other spaces where tighter turning can be useful while retaining the stable footprint of a four-wheel scooter.

The Platinum model also introduces Pride’s Charge360 magnetic charging system. Instead of aligning and inserting a conventional charging connector, the magnetic connection attaches quickly and illuminates when a secure charging connection has been established. A convenient foot pedal allows the tiller angle to be adjusted without reaching down to a traditional adjustment knob.

Feather-touch disassembly separates the scooter into five lightweight pieces for transportation and storage, with the heaviest section weighing approximately 36.2 lbs. Standard 12Ah batteries provide up to 8.9 miles of manufacturer-rated range at 220 lbs., while the optional 18Ah battery configuration can provide up to 14.1 miles at the same rider weight.

For customers comparing portable four-wheel scooters, the Go Go Elite Traveller Gen 3 Platinum offers a practical combination of tight turning, compact transportation, magnetic charging, increased legroom, pathway lighting, and premium everyday convenience.

Key Features

EZ Turn Technology

Pride’s patented EZ Turn technology allows the four-wheel SC443EMS to achieve a manufacturer-rated 39.2-inch turning radius. It is designed to provide tighter maneuverability while maintaining four wheels on the ground.

Charge360 Magnetic Charging

The Platinum features Pride’s exclusive Charge360 magnetic charging connection. The magnetic connector simplifies alignment when attaching the charger and illuminates to indicate that a secure connection has been made.

Foot-Pedal Tiller Adjustment

An easy-to-reach foot pedal allows the tiller angle to be adjusted without requiring the rider to reach toward the base of the steering column. This makes it easier to reposition the tiller for comfort, entry, exit, transportation, or storage.

Redesigned Deck With Additional Legroom

The new sloped deck design provides greater legroom and more flexible foot positioning than traditional compact travel-scooter decks. Its textured surface is also designed for easy cleaning.

Feather-Touch Disassembly

Pride’s feather-touch disassembly system separates the Elite Traveller Gen 3 Platinum into five lightweight pieces for transportation and storage. The front section is the heaviest component at approximately 36.2 lbs.

300-Lb. Weight Capacity

The SC443EMS supports riders weighing up to 300 lbs. while maintaining the compact dimensions and disassembling construction associated with Pride’s Go Go travel-scooter lineup.

Up to 4.23 MPH Maximum Speed

Pride rates the Elite Traveller Gen 3 Platinum for a maximum speed of up to 4.23 mph, providing practical everyday performance for appropriate indoor and outdoor environments.

Standard and Extended-Range Battery Options

The standard 12Ah configuration provides a manufacturer-rated range of up to 8.9 miles at 220 lbs. or 7.1 miles at 300 lbs.

An optional 18Ah battery configuration increases the rated range to as much as 14.1 miles at 220 lbs. or 11.3 miles at 300 lbs.

Breathable Mesh-Back Seat

The standard compact seat measures 17 inches wide by 17 inches deep and combines black vinyl upholstery with a breathable mesh back. Adjustable armrests provide additional positioning flexibility.

Soft-Touch Delta Tiller

A soft-touch wraparound delta tiller provides multiple hand-positioning options and surrounds an intuitive control console with speed adjustment, battery information, horn, ignition, and forward/reverse controls.

Front and Rear Pathway Lights

Front and rear pathway lights are standard equipment and provide additional illumination and visibility when operating in lower-light conditions.

Large Front Storage Basket

A large front basket comes standard and provides convenient storage for smaller personal belongings while traveling.

Solid Flat-Free Tires

Solid, non-scuffing tires eliminate routine tire inflation and reduce the possibility of traditional pneumatic-tire flats.

Interchangeable Color Panels

Cardinal Red matte panels are included as standard. Additional accessory panels are available in Black, Iceberg Blue, Robin’s Egg Blue, Sugar Plum, and Chell-o.

Brand: Pride Mobility

Product Name: Go Go Elite Traveller® Gen 3 Platinum

Model Number: SC443EMS

Product Type: 4-Wheel Travel Mobility Scooter

FDA Classification: FDA Class II Medical Device

Weight Capacity: 300 lbs.

Maximum Speed: Up to 4.23 mph

Maximum Range With Standard 12Ah Batteries: Up to 8.9 miles at 220 lbs.; up to 7.1 miles at 300 lbs.

Maximum Range With Optional 18Ah Batteries: Up to 14.1 miles at 220 lbs.; up to 11.3 miles at 300 lbs.

Turning Radius: 39.2 inches

Overall Length: 41.5 inches

Overall Width: 19.45 inches

Ground Clearance: 1.29 inches at motor; 3.5 inches under deck

Seat-to-Deck Height: 16.38–17.83 inches

Seat-to-Ground Height: 20.75–22.25 inches

Standard Seat: Compact foldable seat with breathable mesh back

Seat Material: Black vinyl with mesh back

Seat Size: 17 inches wide × 17 inches deep

Seat Weight: 23 lbs.

Front Tires: 2" × 7" solid

Rear Tires: 2.5" × 8" solid

Suspension: None

Product Weight Without Batteries: 83.6 lbs.

Product Weight With Standard 12Ah Batteries: 103 lbs.

Product Weight With Optional 18Ah Batteries: 111 lbs.

Heaviest Piece When Disassembled: 36.2 lbs. — front section

Disassembly: Feather-touch disassembly into five lightweight pieces

Drive System: Rear-wheel drive

Motor: Sealed transaxle with 24-volt DC motor

Braking System: Regenerative and electromechanical

Battery Type: Two 12-volt sealed lead-acid, non-spillable deep-cycle batteries

Standard Battery Capacity: 12Ah

Optional Battery Capacity: 18Ah

Standard Battery Pack Weight: Approximately 20 lbs.

Optional 18Ah Battery Pack Weight: Approximately 27.4 lbs.

Battery Charger: 3.5-amp off-board charger

Charging System: Pride Charge360 magnetic charging connection

Tiller: Soft-touch wraparound delta tiller

Tiller Adjustment: Foot-pedal angle adjustment

Lighting: Front and rear pathway lights

Front Basket: Large front basket standard

Standard Color Panels: Cardinal Red

Optional Color Panels: Black, Iceberg Blue, Robin’s Egg Blue, Sugar Plum, and Chell-o

Maximum Rated Slope: 6 degrees

Maximum Obstacle Climbing Ability: Approximately 1.97 inches

HCPCS Code: K0899 — Power Mobility Device, not coded by DME PDAC or does not meet criteria

What's Included?

A standard Pride Go Go Elite Traveller Gen 3 Platinum package generally includes:

• Pride Go Go Elite Traveller® Gen 3 Platinum 4-Wheel Mobility Scooter
• 17-inch × 17-inch foldable mesh-back seat
• 12Ah battery pack with two sealed lead-acid batteries
• 3.5-amp off-board battery charger with Charge360 magnetic connection
• Large front storage basket
• Cardinal Red matte color panels
• Front and rear pathway lights
• Owner's manual and product documentation

The optional 18Ah battery configuration is available for customers who want additional manufacturer-rated driving range.

FAQs

What is the Pride Go Go Elite Traveller Gen 3 Platinum?

The Pride Go Go Elite Traveller Gen 3 Platinum SC443EMS is a four-wheel travel mobility scooter featuring EZ Turn technology, Charge360 magnetic charging, feather-touch disassembly, a redesigned deck, pathway lighting, and a 300-lb. weight capacity.

What is the difference between the Go Go Elite Traveller Gen 3 and Gen 3 Platinum?

Both models share the same basic four-wheel platform, 300-lb. capacity, 39.2-inch turning radius, 4.23-mph maximum speed, redesigned deck, EZ Turn technology, feather-touch disassembly, and available 12Ah or 18Ah batteries.

The Platinum SC443EMS adds Pride’s Charge360 magnetic charging system, a convenient foot-pedal tiller-angle adjustment, a 3.5-amp charger, and Platinum styling details. The standard SC443E uses a conventional charging connection and a 2-amp off-board charger. Pride also assigns different HCPCS codes to the two versions: K0899 for the Platinum and K0800 for the standard Gen 3.

What is Charge360 magnetic charging?

Charge360 is Pride's magnetic charging system. The charger attaches magnetically rather than requiring the user to carefully align and insert a conventional plug. The connection illuminates to indicate when the charger has attached correctly.

How fast does the Go Go Elite Traveller Gen 3 Platinum go?

The manufacturer-rated maximum speed is up to 4.23 mph.

How far can the Platinum travel on a single charge?

With the standard 12Ah battery configuration, Pride rates the scooter for up to 8.9 miles at 220 lbs. and 7.1 miles at 300 lbs.

With the optional 18Ah configuration, the rated range increases to up to 14.1 miles at 220 lbs. and 11.3 miles at 300 lbs. Actual range varies based on operating conditions.

Does the Go Go Elite Traveller Gen 3 Platinum come apart for transportation?

Yes. Pride's feather-touch disassembly system separates the scooter into five lightweight pieces for vehicle transportation or storage.

What is the heaviest piece when disassembled?

The front section is the heaviest component at approximately 36.2 lbs.

Will the Go Go Elite Traveller Gen 3 Platinum fit in a car?

The SC443EMS is designed to disassemble for transportation in many vehicles. Customers should still compare the dimensions of the individual components with their vehicle's cargo opening and storage area before purchase.

Is the Go Go Elite Traveller Gen 3 Platinum a folding scooter?

No. It is a disassembling travel mobility scooter. The seat folds, but the scooter itself separates into five pieces rather than folding into one complete unit.

What batteries come standard with the SC443EMS?

The standard configuration uses two 12-volt, 12Ah sealed lead-acid deep-cycle batteries. An optional 18Ah configuration is available for additional driving range.

Does the scooter have a swivel seat?

The SC443EMS uses a compact 17" × 17" foldable travel-scooter seat with black vinyl upholstery, a breathable mesh back, and adjustable armrests. Customers requiring a particular transfer or seating function should confirm the selected configuration before ordering.

Does the Go Go Elite Traveller Gen 3 Platinum have lights?

Yes. Front and rear pathway lights are standard equipment.

Does it include a front basket?

Yes. A large front storage basket is included as standard equipment.

Does the Platinum use solid tires?

Yes. It uses solid, flat-free, non-scuffing tires that do not require routine inflation.

Can the Go Go Elite Traveller Gen 3 Platinum be used indoors?

Yes. Its compact 19.45-inch width and 39.2-inch turning radius make it appropriate for many indoor environments with adequate clearance, including homes, stores, shopping areas, and other compatible spaces.

Can the Go Go Elite Traveller Gen 3 Platinum be used outdoors?

Yes. It may be operated on compatible outdoor surfaces such as paved sidewalks, parking areas, and maintained pathways. It is a compact travel scooter rather than an all-terrain mobility scooter.

What color comes standard?

Cardinal Red matte color panels are included as standard. Pride also offers accessory panels in Black, Iceberg Blue, Robin's Egg Blue, Sugar Plum, and Chell-o.

What accessories are available?

Pride currently lists accessories including under-seat storage, accessory color panels, cell phone holder, single and double cane/crutch holders, rear basket, oxygen holder, walker holder, weather cover, rearview mirror, lap belt, saddlebag, safety flag, and cup holder. Pride notes that not every accessory can necessarily be used together and availability should be confirmed for the chosen configuration.

Is the Go Go Elite Traveller Gen 3 Platinum covered by Medicare or insurance?

Pride assigns the SC443EMS HCPCS code K0899 — Power Mobility Device, not coded by DME PDAC or does not meet criteria. An HCPCS code does not guarantee Medicare or private-insurance reimbursement. MedStoreVIP sells the scooter as a direct-purchase product and does not bill Medicare or private insurance for online purchases.